Menu

 Free Delivery*  |   Made in UK  |  0% Finance Available  |  01582 787377

TRS Caterham Magnum 4 Point FIA Harness

£264.60
   £180.00

Price Match Promise   •   Free delivery to UK mainland*   •   Prices include VAT Price Match  •  Free delivery to UK*  •  Prices inc. VAT

TRS Harnesses

These are brand new FIA approved harnesses with 2024 homologation, and are labelled accordingly.

A 4 point FIA approved 8854/98 harness from TRS, specifically designed for Caterhams. With shorter shoulder straps, these are ideal for racing in your Caterham 7.

As standard they feature shoulder straps sewn to the correct length, to avoid unnecessary adjusters and fabric in a tight cockpit, and lap straps which adjust by pulling down to tighten.

These Caterham specific harnesses have shoulder straps which measure 50cm from the adjuster to the fixing point.

TRS's lightweight 140 gram quick release buckle is of composite construction and is attached to the right-hand lap strap on 4 point harnesses. Innovative features such as a securing tab for intercom cables on the shoulder strap and thumb loops on lower shoulder straps were all pioneered by TRS and are standard on all of their competition harnesses.

Key Features

  • 4 bolt-in fixing points (7/16" UNF bolts included)
  • FIA Homologation 8854/98
  • SFI Homologation labelling on request
  • Compatible with HANS/FHR devices, however if you intend to only use the harness with a HANS/FHR device we recommend using a 'HANS Only' version with 2" shoulder straps
  • 75mm (3") shoulder straps
  • 75mm (3") lap straps
  • Securing tab for intercom cables on the shoulder strap
  • Thumb loop on lower shoulder straps
  • Standard colours are Red, Blue and Black. Yellow, Green, Grey/Silver, Orange, Pink and Miami Blue are special order (see dropdown above)
  • Made in England

Please note that the rotary buckle can be fixed to either the left or right hand lap strap. Most people prefer the buckle to be on the lap strap that is closest to the centre of the car / the tunnel. This is so that when the buckle is released it goes towards the centre of the car rather than the door. If you are ordering two harnesses we will always supply one harness with a buckle attached to the left hand lap strap and one harness with a buckle attached to the right hand lap strap. If you are ordering a single harness please confirm whether it is for the driver or passenger side (using the dropdown menu above) and we will supply a harness with the rotary buckle fixed to the appropriate side.


Fixing Points

This harness is supplied with anchor plates and 7/16" UNF bolts. The anchor plates have a 13mm hole and are supplied with a top hat spacer that reduces the hole size to the correct diameter for the 7/16" bolts, and allows the anchor plates to rotate slightly when in position.


Options

  • Adjuster Type - Steel as standard, or choose to upgrade to premium aluminium adjusters on the shoulders (superlite), or shoulders and laps (ultralite)
  • Colour - 9 colours are available, check the images to see the different options
  • Upper Shoulder Straps - Choose adjustable upper shoulder straps with either bolt down or snap in fixings, instead of being sewn to the correct length for your vehicle as recommended
  • Lap Straps - Choose to have the lap strap adjusted by pulling up, instead of pulling down as recommended
  • Shoulder Pads - For added comfort, shoulder pads are available in red, blue, or black
  • Webbing Cutter - For use in an emergency, keeping a TRS Webbing Cutter in your vehicle can give you extra peace of mind

Pull Down or Pull Up Lap Straps?

Lap straps can be supplied with either pull down or pull up adjusters. You can make your selection using the dropdown menu above.

We normally recommend pull down adjusters that sit approximately 12cm from the buckle. We recommend these so you have easy access to the adjuster, and they will definitely be positioned within the seat.

As standard, pull up adjusters will sit approximately 12cm from the fixing point at the end of the lap strap, making them difficult to access (they will be down by the sides of the seat), however we are happy to supply them if this is your preference. If you would like pull up adjusters that are a different distance from the fixing point, please contact us. We have supplied some customers with harnesses that have pull up lap adjusters that are 22cm from the fixing point but you would need to check to see if this would be right for your vehicle and the seat you have fitted.


Adjuster Upgrades

You can upgrade the harnesses to the Superlite or Ultralite versions. As standard TRS harnesses use steel anti-creep adjusters. Also available are premium aluminium adjusters, which in addition to being lightweight, offer a smoother and faster adjustment. The Superlite harnesses use these lightweight aluminium adjusters on the shoulder straps, and the Ultralite harnesses use them on both the shoulder and lap straps.

They are highly recommended for vehicles being shared between multiple drivers, and in general we always recommend upgrading to the aluminium adjusters due to their premium look and feel.

Standard Steel Adjusters

TRS 50mm Steel Adjuster

50mm (2") steel adjusters

TRS 75mm Steel Adjuster

75mm (3") steel adjusters

Premium Alloy Adjusters

TRS 50mm Alloy Adjuster

50mm (2") alloy adjusters

TRS 75mm Alloy Adjuster

75mm (3") alloy adjusters


Optional Extras

Three colours of TRS Harness Pads

TRS Shoulder Pads

TRS Webbing Cutter

TRS Webbing Cutter

With these harnesses we offer some optional extras for your comfort and safety, which you can select using the dropdown boxes above.

A pair of TRS Shoulder Pads are available in three colours: black, red, and blue. They simply attach with velcro around the shoulder strap area of the harness, for added comfort for the wearer. They will be provided in the appropriate size for the harness you choose.

Also available is a TRS Webbing Cutter, for use in case of emergencies. This is a knife for a driver, passenger or marshal to cut through harnesses and webbing in the event of an accident, to quickly release the wearer and avoid being trapped in the car. The cutter meets the MSA Blue Book requirement which states "Belt cutter(s) must be carried on board at all times", so it's a must-have when racing.


CLICK HERE to download the fitting instructions for this TRS Harness.

This TRS Harness can be fitted by a competent enthusiast or at a professional workshop. Most of our fitting centres will be able to offer a fitting service for this product - please contact your local fitting centre to find out more.

The delivery estimate for this product is within 5 to 7 working days.


PayPal Pay in 3

Pay in 3

You can spread the cost of your purchase, with 3 interest-free payments, using PayPal Pay in 3. The first will be due at the time of purchase and subsequent payments will be due every month on the same date. It's a great way to spread the cost of larger items, and is a helpful tool to manage your budget more effectively. This can be applied to all orders of from £45 to £2000.

As easy as 1-2-3...

  1. Check out with PayPal.
  2. Choose 'Pay in 3' and complete your purchase.
  3. Make the first payment now, the rest in two payments every month on the same date.

Click here for more information. Terms and conditions apply.


Product Code:
130 01113
Adjuster Type:
Steel Adjusters on Shoulder and Lap Straps
Range:
TRS Magnum
COLOUR:
Black
Fixing Points:
4
Fixing Point Type:
Bolt in
Buckle Type:
Rotary quick release
Shoulder Strap Width:
3" (75mm)
Lap Strap Width:
3" (75mm)
Approval:
FIA Approved
Brand:
TRS