Cobra Clubman 3 Point Road Harness

The top of Cobra's tuning range of 3 point full harness seat belts for saloon and sports cars.

ECE regulation 16.06 homologated for use on public roads. Shoulder straps are adjustable to suit all normal saloon cars. A short shoulder version is available for two seater kit cars (select from dropdown if required).

Lap straps have a 75mm (3") wide pad sewn in for added comfort. Snap hook attachments are fitted all round.

Key Features

Details of the key features of this harness are shown below. If need help deciding which harness is for you, please have a look at our Harness Comparison Table.

• 3 snap hook fixing points
• Road legal 16.06
• Suits saloon/GT cars, with short shoulder version also available for other cars (see dropdown above)
• 50mm (2") shoulder straps
• 50mm (2") lap straps
• 75mm (3") lap pad
• Standard colours are Red, Blue and Black. Yellow, Green, Grey/Silver, Orange, Pink and Miami Blue are special order (see dropdown above)
• Push button release buckle
• 7/16" UNF eye bolts and instructions included
• Made in England

Options

• Adjuster Type - Steel as standard, or choose to upgrade to premium aluminium adjusters on the shoulders (superlite), or shoulders and laps (ultralite)
• Colour - 9 colours are available, check the images to see the different options
• Shoulder Pads - For added comfort, shoulder pads are available in red, blue, or black
• Webbing Cutter - For use in an emergency, keeping a TRS Webbing Cutter in your vehicle can give you extra peace of mind
• Short Shoulder Version - Suitable for smaller cars with shoulder strap fixings directly behind the front seats. Please note that we don't recommend this option if you plan to wrap the shoulder straps around a roll bar.

Adjusters

You can upgrade the harnesses to the Superlite or Ultralite versions. As standard TRS harnesses use steel anti-creep adjusters. Also available are premium aluminium alloy adjusters, which in addition to being lightweight, offer a smoother and faster adjustment. The Superlite harnesses use these lightweight aluminium adjusters on the shoulder straps, and the Ultralite harnesses use them on both the shoulder and lap straps.

They are highly recommended for vehicles being shared between multiple drivers, and in general we always recommend upgrading to the aluminium adjusters due to their premium look and feel.

Standard Steel Adjusters

50mm (2") steel adjusters

75mm (3") steel adjusters

Premium Aluminium Adjusters

50mm (2") aluminium adjusters

75mm (3") aluminium adjusters

Shoulder Straps

• Standard length shoulder straps are approximately 150cm from the adjuster to the fixing point
• Short shoulder version straps are approximately 90cm from the adjuster to the fixing point
• The adjustment range of the lower shoulder strap is between 10cm and 40cm
• If you plan to fix the shoulder straps in place by wrapping them around a roll bar we would recommend going with the standard length shoulder straps as you will need approximately 50cm of excess webbing to wrap around securely
• The fixings at the end of the shoulder straps are not sewn on, and can easily be removed if you plan to wrap the shoulder straps around a roll bar

Bespoke Harness Options

Do you require bespoke options? CLICK HERE to download our Harness Spec Sheet. You can complete this and email it to us for a quote, or just give us a call.

Extras

Cobra Shoulder Pads

TRS Webbing Cutter

With these harnesses we offer some optional extras for your comfort and safety, which you can select using the dropdown boxes above.

A pair of Cobra Shoulder Pads are available in three colours: black, red, and blue. They simply attach with velcro around the shoulder strap area of the harness, for added comfort for the wearer. They will be provided in the appropriate size for the harness you choose.

Also available is a TRS Webbing Cutter, for use in case of emergencies. This is a knife for a driver, passenger or marshal to cut through harnesses and webbing in the event of an accident, to quickly release the wearer and avoid being trapped in the car. The cutter meets the MSA Blue Book requirement which states "Belt cutter(s) must be carried on board at all times", so it's a must-have when racing.

CLICK HERE to download the fitting instructions for this TRS Harness.

This Cobra Harness can be fitted by a competent enthusiast or at a professional workshop. Most of our fitting centres will be able to offer a fitting service for this product - please contact your local fitting centre to find out more.

The delivery estimate for this product is within 7 to 10 working days.

Pay in 3

You can spread the cost of your purchase, with 3 interest-free payments, using PayPal Pay in 3. The first will be due at the time of purchase and subsequent payments will be due every month on the same date. It's a great way to spread the cost of larger items, and is a helpful tool to manage your budget more effectively. This can be applied to all orders of from £45 to £2000.

As easy as 1-2-3...

1. Check out with PayPal.
2. Choose 'Pay in 3' and complete your purchase.
3. Make the first payment now, the rest in two payments every month on the same date.

Click here for more information. Terms and conditions apply.